Blind spots are areas around a vehicle that the driver cannot see directly. These blind spots can be dangerous, since they can cause accidents. Identifying a truck’s blind spots is essential to avoiding traffic accidents. Throughout this blog we will explain the most essential things you should know about truck blind spots:

  • What are blind spots?
  • Where are a truck’s blind spots?
  • Top 10 tips to avoid accidents caused by a vehicle’s blind spot

However, there is something important you need to know. If you or a loved one has been the victim of a truck accident, you have the right to claim compensation. To do so, it is advisable to have the help of an experienced injury accident lawyer.

What are blind spots?

Blind spots while driving are areas around the vehicle that the driver cannot see directly. These blind spots are created by the windshield frame pillars, the vehicle’s center posts and the upper rear sides.

These important parts of the body are precisely what block the driver’s clear view of the surroundings.

Truck blind spots occur for two main reasons:

  • The shape of the vehicle: Vehicles have a shape that does not allow the driver to see everything happening around them.
  • The mirrors: Mirrors help reduce blind spots, but they do not eliminate them completely.

Blind spots vary in size and shape depending on the vehicle. In general, larger vehicles have larger blind spots.

Blind spots can also vary depending on the driver’s position in the vehicle. As an important note, drivers who sit higher in their seat have better visibility than drivers who sit lower.

Where are a truck’s blind spots?

A truck’s blind spots are areas around the vehicle that the driver cannot see directly. These blind spots are created by the shape of the vehicle, the size of the load and the driver’s position.

The blind spots are:

  • Front blind spots: These are located at the front of the truck, just behind the windshield pillars. These blind spots can be particularly dangerous when passing or changing lanes. They are created by the windshield pillars, which block the driver’s view. These blind spots can be as large as an entire car.
  • Rear blind spots: These are located at the back of the truck, just behind the load. These blind spots can be particularly dangerous when backing up or changing lanes. They are created by the load, which blocks the driver’s view. These blind spots can be very risky when parking or backing up.
  • Side blind spots: These are located on the sides of the truck, just behind the mirrors. These blind spots can be particularly dangerous when changing lanes or turning. They are created by the mirrors, which cannot show everything happening on the sides of the truck.

Top 10 tips to avoid blind spot accidents

Blind spots are areas around a vehicle that the driver cannot see directly. These blind spots can be dangerous, since they can cause accidents. That is why it is important for drivers to be aware of them and take steps to avoid them.

Here are 10 tips to avoid truck blind spot accidents:

1. Learn where your vehicle’s blind spots are

The first step to avoiding blind spot accidents is to learn where your vehicle’s blind spots are. You can do this by looking at your vehicle’s owner’s manual or by doing a simple test.

To do the test, follow these steps:

  • Park your vehicle in a safe place.
  • Open the driver’s side door and place yourself where your seat would be if you were sitting.
  • Look forward and take note of what you can see.
  • Now, look back and take note of what you can see.
  • The difference between what you can see looking forward and what you can see looking back is your blind spot.

2. Adjust your mirrors correctly

Mirrors should be adjusted so the driver can see everything happening around them. To adjust your mirrors correctly, follow these steps:

  • Adjust the inside rearview mirror so you can see the back of your vehicle.
  • Adjust the left side mirror so you can see the road line to the left of your vehicle.
  • Adjust the right side mirror so you can see the road line to the right of your vehicle.

3. Turn your head to look over your shoulder

Mirrors cannot show everything happening around you. That is why it is important to turn your head and look over your shoulder when changing lanes, passing or parking.

By turning your head, you will be able to see any vehicle or cyclist that may be in your blind spot.

4. Use turn signals early

Turn signals give other drivers time to react to your movements. This is especially important when changing lanes, passing or parking.

By using turn signals early, you give other drivers time to see that you are moving and avoid entering your blind spot.

5. Be patient and careful when driving in low-visibility conditions

Contact UsContact Us

Blind spots can be harder to see in the dark or in fog. That is why it is important to be patient and careful when driving in low-visibility conditions.

By being patient and careful, you will have more time to react if a vehicle enters your blind spot.

6. Be aware of other vehicles on the road

Check your mirrors frequently and watch for vehicles that could be in your blind spots.

By being aware of other vehicles on the road, you will be able to spot any vehicle approaching your blind spot. This will give you time to take steps to avoid an accident.

7. Avoid distracted driving

Distraction behind the wheel can increase the risk of blind spot accidents.

When you are driving, avoid being distracted by your phone, the radio or anything else. Focus on the road and the other vehicles around you.

8. Keep a safe distance between your vehicle and the vehicle in front of you

This will give you more time to react if a vehicle enters your blind spot.

A safe distance is the distance that allows you to stop safely if the vehicle in front of you brakes suddenly.

9. Be aware of cyclists and pedestrians

Cyclists and pedestrians can be hard to see in blind spots.

Be especially careful when changing lanes or passing cyclists or pedestrians.

10. Take special care when changing lanes, passing or parking

Large vehicles, such as 18-wheelers, have larger blind spots than a car’s blind spots. When driving a large vehicle, be especially careful when changing lanes, passing or parking. Turn your head to look over your shoulder more often and use turn signals early.

Are there blind spot crash lawyers?

Injury accident lawyers are dedicated to protecting victims’ rights. Truck accidents are one of several practice areas related to crashes. That is why specialized lawyers help victims obtain compensation that allows them to:

  1. Cover lost wages.
  2. Receive reimbursement for their lost wages.
  3. Obtain payments for pain and suffering (that is, the psychological and emotional injuries the victim has developed as a result of the accident).

To receive compensation of this kind, it is important for the victim to be advised by a law firm with extensive experience winning cases like theirs.

At Hilda Sibrian® – Accident Attorneys we specialize in winning accident cases involving a truck’s blind spots. If you or a loved one was the victim of a crash, request a free consultation so we can evaluate your case. We speak Spanish and are available 24/7.

If you found this article interesting, you may also want to read: